Bobst vacuum metallizer controls the coating autonomously

Bobst presents the Expert K5, a vacuum metallizing machine that largely controls the coating process without the need for trained personnel. The AI-powered iMA software monitors the aluminum evaporation through a camera and is designed to reduce waste and set-up times.
(Image: Bobst)

Bobst has introduced the Expert K5 vacuum metalizing machine, which according to the company controls the coating process largely autonomously and without trained operators. At the heart of the machine is the AI-powered iMA (Intelligent Metallizing Assistant) software, which monitors the aluminum evaporation using high-resolution cameras and simultaneously controls the temperature of up to 60 evaporators.

Until now, vacuum metallization has been a largely manual process: Trained operators set film and process parameters, visually monitored the aluminum evaporation, and continuously adjusted the settings. In this process, an extremely thin aluminum layer is applied to substrates such as PET, PP, or increasingly PE-based films. The low metal content improves the barrier against oxygen, moisture, and light without adding to the weight and thickness of an aluminum foil. For products such as snacks, confectionery, coffee, and powdered foods, vacuum metallization is considered an important factor for durability and product quality.

(Image: Bobst)

Four trends drive automation

According to Bobst, several developments in the industry point to a greater automation of the metalization process. First, the shortage of skilled personnel: According to a survey cited by Bobst, 95 percent of companies in the packaging industry report difficulties in filling positions for trained operators and technicians. As experienced employees retire, companies face the threat of losing years of process knowledge, along with a shrinking pool of applicants.

Secondly, the EU packaging regulation changes the material requirements: from 2030 onwards, according to the regulation, packaging must meet recyclability criteria, with gradually increasing requirements thereafter. This increases the pressure on processors to switch from highly recyclable multilayer structures to single materials. A very thin vacuum-metallized aluminum layer could play a role in lightweight, recyclable single material high barrier packaging. However, the single material makes the metalization process less error-tolerant, while at the same time higher consistency and fewer defects are required.

Thirdly, the complexity of sustainable substrates increases: materials such as BOPE, MDO-PE, and other newer films are more demanding to process and require tighter process control to maintain barrier properties and avoid thermal damage and waste. Fourthly, metalizers are becoming wider and more productive: on a wide-scale facility, there could be up to 60 evaporators. Traditionally, operators had to visually inspect the aluminum pools on each vessel and continuously adjust the output, which greatly affected machine performance depending on the operator’s experience.

Shorter optimization path, fewer errors

Instead of operators continuously monitoring the aluminum pools and adjusting them individually, the Expert K5 machine takes over the process monitoring and control. According to Bobst, the system reduces the optimization length from 12.5 kilometers to five kilometers per roll and reduces large defects by 50 percent, which should reduce the amount of substrate lost during production. A faster vacuum pump also shortens setup times.

Condition monitoring, process traceability, and remote support via Bobst Connect are intended to reduce downtime and make troubleshooting less dependent on onsite expertise. Lower evaporator temperatures and longer evaporator life are also intended to reduce energy and consumables costs.

According to Bobst, the Expert K5 is designed for processing BOPE, MDO-PE, CPP, paper and heat-sensitive BOPP, as well as ultra-thin films such as 6-micron BOPP. This is intended to enable processors to handle more complex materials and production requirements without being more dependent on increasingly scarce skilled personnel.

Source: Bobst Group