The current economic weakness is also evident in the plastics industry. The „Material Flow of Plastics in Germany 2025“ report shows a decline in production, processing, consumption, and waste generation of plastics compared to 2023. At the same time, the production of recycled materials, the use of recycled materials, and the recycling rate are both showing positive trends; however, the dynamics have slowed down compared to previous survey periods. The analysis commissioned by BKV is compiled on a biennial basis and covers the entire life cycle of plastics, from production to the re-use of recycled materials.
The production of plastics based on fossil raw materials decreased from 8.82 million tons in 2023 to 8.64 million tons in 2025. The volume of processing, including the use of recycled materials and the reuse of by-products, decreased from 12.85 to 12.22 million tons. Plastic consumption in Germany decreased from 11.25 to 10.93 million tons. For the first time since the start of the survey, the volume of post-consumer plastic waste also fell slightly.
According to the material flow map, around two-thirds of the processed plastics, about eight million tons, are used in durable applications such as automotive and machinery manufacturing, electrical applications, household and sports goods, and civil engineering. Around four million tons, or another third, are used in short-lived applications such as packaging and individual agricultural applications – the area that is particularly relevant for the use of recycled materials.
Circular economy is growing more slowly
The production of recyclates from post-consumer and post-industrial waste increased slightly to 2.05 million tons in 2025. Of this, 1.72 million tons were from post-consumer recyclates. The use of post-consumer recyclates increased from 1.54 to 1.66 million tons, and their share in plastic processing rose from 12.0 to 13.6 percent. According to the study, more than a fifth of the processed plastic volume now comes from non-fossil sources such as recyclates or recycled by-products.
However, the growth rates are significantly lower than in previous survey periods. While the use of post-consumer recycled materials increased by more than 21 percent between 2021 and 2023, the growth rate between 2023 and 2025 was just under eight percent. This corresponds to an average annual growth rate of around ten percent in the previous survey period and just under four percent in the current survey period. The total recycled material production increased by only around two percent between 2023 and 2025, or about one percent per year. Due to the decreasing amount of plastic processing of more than 600,000 tons, the production of post-industrial recycled material also decreased from around 370,000 tons in 2023 to around 330,000 tons in 2025.
Conversion to a circular economy is losing momentum
The mechanical recycling rate for plastic waste increased from 37.9 percent in 2023 to 39.5 percent in 2025. Similarly, the production of biobased plastics increased to around 160,000 tons. However, according to the material flow diagram, this does not change the overall picture: the transition to a circular economy is losing momentum and remains behind the dynamics described as necessary.
The structural pressure in the recyclate market is particularly evident. According to the study, the use of post-consumer recyclates is growing faster than corresponding production in Germany. Recyclates are increasingly being supplied by cheaper imports, which weakens the demand for domestic recyclates. The material flow picture cited bureaucratic framework conditions, as well as high production, energy, and location costs in Germany and Europe as reasons for the price pressure. Imported recyclates, which are not always reliably verifiable, could therefore be more attractive in terms of price than domestically produced materials, also because they are not necessarily produced under comparable ecological conditions. This makes it more difficult for domestic recyclers to utilize existing facilities and invest in additional capacity and infrastructure.
According to the associations involved, the material flow diagram makes clear that progress in recycling and the use of recycled materials alone is not enough. If production and processing in Germany decline and domestic recycled materials lose competitiveness compared to imports, investments in sorting, recycling, and industrial circuits will also come under pressure. Reliable framework conditions, competitive energy and production costs, and incentives for investment and innovation are crucial to further advance the circular economy in Germany.
Source: BDE Federal Association of the German Waste Management, Water and Circular Economy Industry






